
For arrow shafts during building and repair
$19.00
A bench stand that holds a row of arrows apart from each other while the glue on the points sets.
Bank cardThe designer spaced the slots so hot-melt glue on one point does not stick to the next arrow. Four notches in the base set the lean angle, and a hole lets an arrow stand straight up.
120 x 119 mm (4.7 in) at the base and 100 mm tall.
| Piece | Qty | Size of one | Weight of one |
|---|---|---|---|
| Arrow stand | 1 | 120 × 118.5 × 100 mm4.7 × 4.7 × 3.9 in | 138 g4.9 oz |
Sizes are measured from the design files. Weights are estimates for ASA.
This part is printed from Arrow Stand by PicklesTheCat, licensed under CC BY-SA 4.0. Thank you to the designer for sharing it.
We print it as published, with no changes to the design. Any changes we make to the design files are shared under the same license.

For target and hunting arrows

For arrow tubes with a 4 in inside diameter

For small digital grain scales

For press-fit arrow nocks

For quiver belts up to 40 mm wide and 6.5 mm thick