
For arrow tubes with a 4 in inside diameter
$12.00
Two round clips that hold a dozen arrows apart inside a 4 in arrow tube, so they stop banging together.
Bank cardSnap each arrow into a slot on the rim. Use one clip near the points and one near the fletching, as the designer does.
Each clip is 101 mm (4 in) across and 20 mm thick, with twelve slots and a center hole that takes a 3/8 in dowel if you want a spine down the middle.
| Piece | Qty | Size of one | Weight of one |
|---|---|---|---|
| Clip | 2 | 100.8 × 100.8 × 20 mm4 × 4 × 0.79 in | 32 g1.1 oz |
| Whole pack | 2 | 63 g2.2 oz |
Sizes are measured from the design files. Weights are estimates for ASA.
This part is printed from Arrow Tube Arrow Clips by Topher749, licensed under CC BY 4.0. Thank you to the designer for sharing it.
It builds on Circular Arrow Clip by Jorg_1321, licensed under CC BY 4.0.
We print it as published, with no changes to the design.

For target and hunting arrows

For arrow shafts during building and repair

For small digital grain scales

For press-fit arrow nocks

For quiver belts up to 40 mm wide and 6.5 mm thick